Sep 10 2024
/
The “Extreme Whirlpool” water slide uses self-lubricating materials and does not require continuous rinsing.
High-polymer self-lubricating slides provide smooth sliding even on dry surfaces.
Traditional water slides require a lot of water to reduce friction. The new slide's inner surface is covered with a layer of high-polymer self-lubricating material, with a friction coefficient of only 0.08, allowing people to slide smoothly even without water, saving up to 70% of water.
- The sinkhole is only 0.8 meters deep, providing a safe buffer.
To avoid panic in the deep water, the depth of the plunge pool is controlled at 0.8 meters, and a flexible cushioning pad is laid at the bottom. When tourists slide in, their speed has already dropped to less than 3 meters per second, and with the resistance of the water, the impact force is far below the human body's tolerance limit.
The vortex spiral design provides stronger centrifugal force.
The slide adopts a three-section vortex spiral structure. After entering the second section, the rider will move in a circle along the funnel wall with a diameter of 4 meters, generating a centrifugal experience with 2.5 times the acceleration of gravity, and finally fall into the pool below.
technological breakthrough
- Self-lubricating materials have a wear resistance life of up to 30,000 cycles.
- No high-pressure water pump is needed; simply moisten the skin with a small amount of water.
- The slide rails are assembled in sections and support modular replacement.
The sinkhole is only 0.8 meters deep, providing a safe buffer. To avoid panic in deep water, the sinkhole's depth is controlled at 0.8 meters, with a flexible cushioning pad at the bottom. When visitors slide in, their speed is reduced to below 3 meters per second, and with the water resistance, the impact is far below the human body's tolerance limit.
Reduced installation costs, suitable for older swimming pools Since it eliminates the need for complex flushing networks and large water pumps, installation costs are approximately 40% lower than traditional water slides. Indoor heated swimming pools and older outdoor pools can be directly retrofitted; only a power supply and drainage outlet need to be provided.